Flue, Boiler & Pipe Brushes

FLUE BRUSH-SINGLE SPIRAL

PRODUCTACTUAL BRUSHBOILER TUBE
NUMBERDIAMOUTSIDE DIAM

FBS-2108*1/2"3/4"
FBS-2110*5/8"7/8"
FBS-21123/4"1"
FBS-21161"1-1/4"
FBS-21201-1/4"1-1/2"
FBS-21241-1/2"1-3/4"
FBS-21281-3/4"2"
FBS-21322"2-1/4"
FBS-21362-1/4"2-1/2"
FBS-21402-1/2"2-3/4"
FBS-21442-3/4"3"
FBS-21483"3-1/4"
FBS-21523-1/4"3-1/2"
FBS-21563-1/2"3-3/4"
FBS-21603-3/4"4"
FBS-21644"4-1/4"
*Equipped with 1/8" pipe nipple.

FLUE BRUSH DOUBLE SPIRAL

PRODUCTACTUAL BRUSHBOILER TUBE
NUMBERDIAMOUTSIDE DIAM

FBD-2208*1/2"3/4"
FBD-2210*5/8"7/8"
FBD-22123/4"1"
FBD-22161"1-1/4"
FBD-22201-1/4"1-1/2"
FBD-22241-1/2"1-3/4"
FBD-22281-3/4"2"
FBD-22322"2-1/4"
FBD-22362-1/4"2-1/2"
FBD-22402-1/2"2-3/4"
FBD-22442-3/4"3"
FBD-22483"3-1/4"
FBD-22523-1/4"3-1/2"
FBD-22563-1/2"3-3/4"
FBD-22603-3/4"4"
FBD-22644"4-1/4"
*Equipped with 1/8" pipe nipple.

NOTE: Flue Brushes are sized according to the inside diameter of the flue, which is usually 1/4" smaller than the outside diameter.

INSIDE DIAM 2-3/4" I.D.
3" O.D.
CROSS SEC. VIEW OF A 3" FLUE.

TUBE FITTING BRUSH-INTERNAL

PRODUCTTUBE
NUMBERSIZE

TFI-31021/8"
TFI-31041/4"
TFI-31063/8"
TFI-31081/2"
TFI-31105/8"
TFI-31123/4"
TFI-31147/8"
TFI-31161"
TFI-31201-1/4"
TFI-31241-1/2"
TFI-31322"

TUBE FITTING BRUSH-EXTERNAL

PRODUCTTUBE
NUMBERSIZE

TFE-32041/4"
TFE-32063/8"
TFE-32081/2"
TFE-32105/8"
TFE-32123/4"
TFE-32147/8"
TFE-32161"

CONDENSER TUBE BRUSHES

PRODUCTACTUAL BRUSH
NUMBERDIAMETER

CTB-41063/8'
CTB-41081/2"
CTB-41105/8"
CTB-41123/4"
CTB-41147/8"
CTB-41161"
CTB-41201-1/4"
CTB-41241-1/2"
CTB-41281-3/4"
CTB-41322"
CTB-41362-1/4"
CTB-41402-1/2"
CTB-41442-3/4"
CTB-41483"
Available in Stainless Steel, Brass, and Nylon on Special Order.



Caution:
There has been no industry standard established on maximum safe free speed on power tube brush items. Run in clockwise direction from stem or nipple end only! Reversing direction will cause brush to unwind.

Safety Requirements: Operators must, at all times, observe common safety practices, such as wearing goggles, keeping machine guards in place, observing all speed restrictions, wearing appropriate protective clothing and comply with ANS-B165.1 - 1979 "Safety Requirements For The Design, Care And Use Of Power Driven Brushing Tools."

Artist Brushes pg 1 pg 2
Chip Brushes
Cup Brushes
Flue, Boiler & Pipe Brushes
Kalsomine Brushes
Maintenance Brushes
   Floor - Fine
   Floor - Medium
   Floor - Coarse
   Heavy Duty
   Handles
   Broom
   Dusters
   Window
   Sanitary
   Deck & Whisk
   Wire
   Hand Wire
   Platers
   Tube & Spiral
Mops
Paint Brushes
Paint Roller Applicators
Power Tube Brushes
Sash Tool Brushes
Squeegees
Varnish Brushes
Wire End Brushes
Wire Wheel Brushes
   Crimped-Narrow
   Crimped-Medium
   Crimped-Heavy Duty
   Knot Type
   Copper Center
Whitewash Brushes

Catalog Pages
   Metal Wire Type

A1
A2
A3
A4
A5
A6
A7
A8

   Maintenance Type

B1
B2
B3
B4
B5
B6
B7
B8
B9
B10
B11
B12

   Paint, Varnish,
   Artist Type

C1
C2
C3
C4
C5
C6
C7
C8
Index